इन्जिनियरिङ काउन्सिल (NEC) – Engineering Council (NEC) MCQ
इन्जिनियरिङ काउन्सिल (NEC) – लाइसेन्स परीक्षा
Engineering Council (NEC) · Nepal Professional License Exams · ५९७ प्रश्न
५९७ प्रश्न उपलब्ध। मोड छान्नुहोस्:
इन्जिनियरिङ काउन्सिल (NEC): प्रश्न र उत्तर
सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ३ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।
सही: ० / ०
-
The elastic section modulus of a rectangular section of width b and depth d about its neutral axis is:
सही उत्तर: क) bd²/6
Z = I / y_max = (bd³/12) / (d/2) = bd²/6.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The maximum deflection of a simply supported beam of span L under a uniformly distributed load w per unit length is:
सही उत्तर: घ) 5wL⁴/(384EI)
For a simply supported beam with UDL, δmax = 5wL⁴/384EI at mid-span; wL⁴/384EI is the value for a fixed-fixed beam.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The maximum deflection of a simply supported beam of span L with a central point load W is:
सही उत्तर: घ) WL³/(48EI)
Standard result for a simply supported beam with a central point load: δmax = WL³/48EI at mid-span; WL³/3EI is for a cantilever with end load.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A cantilever of length L carries a point load P at its free end. The maximum bending moment occurs at the fixed end and equals:
सही उत्तर: घ) PL
The moment at the support is load × lever arm = P × L, the largest value along the cantilever.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A material has E = 200 GPa and Poisson's ratio 0.25. What is its modulus of rigidity G?
सही उत्तर: ग) 80 GPa
E = 2G(1 + μ), so G = 200 / (2 × 1.25) = 80 GPa.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
For structural steel, the value of Poisson's ratio is approximately:
सही उत्तर: ख) 0.30
Poisson's ratio of steel is about 0.25 to 0.30, commonly taken as 0.3; it cannot exceed 0.5 for isotropic materials.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Young's modulus of elasticity is defined as the ratio of:
सही उत्तर: ग) Longitudinal stress to longitudinal strain
Within the elastic limit, E = longitudinal (normal) stress / longitudinal strain; shear stress/shear strain is the modulus of rigidity and volumetric ratio is the bulk modulus.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
ताजा कंक्रिटमा पानी सतहमा माथि आउने प्रक्रियालाई के भनिन्छ?
सही उत्तर: घ) ब्लिडिङ (Bleeding)
ब्लिडिङमा भारी कणहरू तल बस्दा मिक्सको पानी सतहमा आउँछ, जसले सतह कमजोर बनाउँछ। सेग्रिगेसन भनेको मोटो एग्रिगेट र मोर्टार छुट्टिने प्रक्रिया हो।
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
कंक्रिटमा लामो समयसम्म स्थिर भार रहँदा समयसँगै बढ्ने विकृति (Strain) लाई के भनिन्छ?
सही उत्तर: ग) क्रिप (Creep)
स्थिर दीर्घकालीन भारमा समयसँगै बढ्ने विकृतिलाई क्रिप भनिन्छ। श्रिन्केज भने भार नभए पनि पानी सुक्दा हुने संकुचन हो।
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
RCC मा स्टिल र कंक्रिट सँगै राम्रोसँग काम गर्नुको एउटा मुख्य कारण के हो?
सही उत्तर: क) दुवैको थर्मल विस्तार गुणाङ्क (Coefficient of thermal expansion) लगभग उस्तै हुनु
स्टिल र कंक्रिटको थर्मल विस्तार गुणाङ्क करिब बराबर भएकाले तापक्रम परिवर्तनमा बन्ड टुट्दैन। साथै कंक्रिटले स्टिललाई खियाबाट जोगाउँछ; तर दुवैको घनत्व र शक्ति धेरै फरक हुन्छ।
💬 टिप्पणी / गल्ती रिपोर्ट (०)
यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।
नमस्ते! पाठ्यक्रम, सामान्य ज्ञान, भाषा परीक्षा वा कुनै प्रश्नको उत्तर बुझ्न सोध्नुहोस्।
AI ले गल्ती गर्न सक्छ। महत्वपूर्ण कुरा आधिकारिक स्रोतमा जाँच्नुहोस्।