नमस्ते · Hello

विद्या ददाति विनयं विनयाद् याति पात्रताम्।

विद्याले विनम्रता दिन्छ, विनम्रताबाट योग्यता आउँछ।

Knowledge gives humility, and humility makes one worthy.

…

सर्भेक्षण – Surveying MCQ

सर्भेक्षण – सिभिल इन्जिनियरिङ

Surveying · Civil Engineering · १,५६५ प्रश्न

१,५६५ प्रश्न उपलब्ध। मोड छान्नुहोस्:

सर्भेक्षण: प्रश्न र उत्तर

सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ३ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।

  1. The temporary adjustments of a level carried out at every set-up are:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  2. The plumbing fork in plane tabling is used for:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  3. In plane tabling, locating an inaccessible point by drawing rays to it from two known stations is called:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  4. Determining the difference in elevation between two distant points with no intermediate readings, using a series of set-ups, is called:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  5. Levelling carried out along the centre line of a proposed road to obtain the ground profile is called:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  6. Levelling in which the vertical angle and horizontal distance are used to compute elevation differences is called:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  7. The plane tabling method in which rays are drawn to objects from a single station and distances measured along them is called:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  8. In plane table surveying, orientation of the table by sighting a previously plotted station along the drawn line is called orientation by:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  9. The effect of atmospheric refraction on a line of sight is to make objects appear:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  10. A tacheometer has K = 100 and C = 0.3 m. The staff intercept on a horizontal sight is 2.00 m. The horizontal distance is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।