सिभिल इन्जिनियरिङ
सिभिल इन्जिनियरिङ
Civil Engineering · ५,१७१ प्रश्न
५,१७१ प्रश्न उपलब्ध। मोड छान्नुहोस्:
सिभिल इन्जिनियरिङ: प्रश्न र उत्तर
सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ३ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।
सही: ० / ०
-
In cement manufacture, the cooled clinker is finally:
सही उत्तर: ख) Ground with a small quantity of gypsum in a ball (tube) mill
Clinker is ground to fine powder along with about 3–5% gypsum to produce Portland cement.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Wire-cut bricks are produced by:
सही उत्तर: क) Extruding a continuous column of stiff clay through a die and cutting it into bricks with wires
In the stiff-mud process the extruded clay column is cut by taut wires, giving bricks of uniform size without frogs.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Glazier's putty, used to fix glass panes in wooden frames, is a mixture of:
सही उत्तर: घ) Whiting (powdered chalk) and linseed oil
Traditional putty is whiting mixed with raw linseed oil, which hardens slowly by oxidation.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Shellac, used for knotting and in French polish, is a resin obtained from:
सही उत्तर: ग) The secretion of the lac insect
Shellac is refined from lac, a resinous secretion deposited on trees by the lac insect.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Mastic asphalt, used for damp-proof courses and waterproofing flat roofs, is:
सही उत्तर: ख) A mixture of bitumen with fine mineral filler and aggregate that forms a dense, voidless, impermeable mass when laid hot
Mastic asphalt is laid hot and spread by hand floats, giving an impervious layer without needing compaction.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A small amount of alkalis in brick earth acts as a flux during burning, but an excess of alkalis causes:
सही उत्तर: क) Melting and distortion of bricks during burning, and efflorescence in the finished bricks
Excess alkalis lower the fusion temperature, making bricks melt and warp, and soluble salts later appear as efflorescence.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
As per IS 456, concrete of grades M10 to M20 is classified as:
सही उत्तर: ग) Ordinary concrete
IS 456 groups M10–M20 as ordinary concrete, M25–M55 as standard concrete and M60 and above as high strength concrete.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
When an aggregate is found to be potentially alkali-reactive, a common precaution is to:
सही उत्तर: ख) Use low-alkali cement or replace part of the cement with a pozzolana such as fly ash
Limiting alkalis and using pozzolanas that bind alkalis reduce the expansive alkali-silica reaction.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Class F fly ash (as per ASTM C618) is:
सही उत्तर: क) A low-calcium fly ash, usually from burning bituminous or anthracite coal, with mainly pozzolanic properties
Class F is low in lime and is pozzolanic; Class C (from lignite or sub-bituminous coal) is high in calcium and partly self-cementing.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The pozzolanic reaction in concrete containing fly ash or silica fume is the reaction between:
सही उत्तर: घ) Reactive silica of the pozzolana and calcium hydroxide released by cement hydration, forming additional C-S-H
Pozzolanas consume the weak, soluble Ca(OH)2 and produce extra C-S-H, improving long-term strength and impermeability.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।
नमस्ते! पाठ्यक्रम, सामान्य ज्ञान, भाषा परीक्षा वा कुनै प्रश्नको उत्तर बुझ्न सोध्नुहोस्।
AI ले गल्ती गर्न सक्छ। महत्वपूर्ण कुरा आधिकारिक स्रोतमा जाँच्नुहोस्।