सिभिल इन्जिनियरिङ
सिभिल इन्जिनियरिङ
Civil Engineering · ५,१७१ प्रश्न
५,१७१ प्रश्न उपलब्ध। मोड छान्नुहोस्:
सिभिल इन्जिनियरिङ: प्रश्न र उत्तर
सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ३ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।
सही: ० / ०
-
The compressive strength of cement is tested on mortar cubes of what size?
सही उत्तर: क) 70.6 mm cubes
Cement mortar cubes of 70.6 mm side (50 cm² face area) with 1:3 standard sand are used.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Water for the initial setting time test of cement is taken as:
सही उत्तर: ख) 0.85 times the water for standard consistency
For setting time tests, the paste is gauged with 0.85P water, where P is the standard consistency.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The water required for standard (normal) consistency of ordinary Portland cement is typically about:
सही उत्तर: ख) 26% to 33% of cement weight
Normal consistency of OPC generally lies between about 26% and 33% water by weight of cement.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The standard consistency test of cement gives the percentage of water at which the Vicat plunger penetrates to a point:
सही उत्तर: घ) 5 to 7 mm from the bottom of the mould
Normal consistency is the water content at which the Vicat plunger penetrates to 5–7 mm from the bottom of the mould.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The Vee-Bee consistometer test expresses the workability of concrete in terms of:
सही उत्तर: क) Time in seconds
In the Vee-Bee test, the time in seconds taken for the concrete to remould from a slump cone shape under vibration measures workability of stiff mixes.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The main purpose of curing concrete is to:
सही उत्तर: ग) Keep it moist so that hydration of cement continues
Curing maintains moisture and temperature so hydration continues, giving strength and durability and reducing shrinkage cracks.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Setting time of cement is determined using:
सही उत्तर: ग) Vicat's apparatus
Vicat's apparatus with its needles and plunger is used for consistency and setting time tests.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The water chemically required for complete hydration of cement is about what percentage of the cement weight?
सही उत्तर: ग) About 23%
Complete hydration needs about 23% water by weight of cement for chemical combination (plus some gel water), so w/c ratios of about 0.38 suffice chemically.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Portland slag cement is produced by intergrinding OPC clinker with:
सही उत्तर: ख) Granulated blast furnace slag
Portland slag cement contains granulated blast furnace slag from steel plants, along with clinker and gypsum.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Hydrophobic cement is especially suitable when cement has to be:
सही उत्तर: ग) Stored for long periods in very wet climates
Hydrophobic cement grains are coated with a water-repellent film, so it can be stored in humid conditions without deterioration.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।
नमस्ते! पाठ्यक्रम, सामान्य ज्ञान, भाषा परीक्षा वा कुनै प्रश्नको उत्तर बुझ्न सोध्नुहोस्।
AI ले गल्ती गर्न सक्छ। महत्वपूर्ण कुरा आधिकारिक स्रोतमा जाँच्नुहोस्।