इन्जिनियरिङ सेवा असिस्टेन्ट सब-इन्जिनियर (चौथो तह) – प्राविधिक पत्र
इन्जिनियरिङ सेवा – असिस्टेन्ट सब-इन्जिनियर (चौथो तह)
Assistant Sub-Engineer – 4th Level · Engineering Service
१,५०३ प्रश्न उपलब्ध। मोड छान्नुहोस्:
प्राविधिक पत्र: प्रश्न र उत्तर
सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ५ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।
सही: ० / ०
-
Ready-mixed concrete (RMC) is:
सही उत्तर: घ) Concrete batched at a central plant and delivered to site in transit mixers
RMC is produced under controlled conditions in a batching plant and transported in truck-mounted agitators.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Adding steel, glass or polypropylene fibres to concrete mainly improves its:
सही उत्तर: क) Resistance to cracking and tensile/impact strength
Fibres bridge cracks and improve tensile strength, toughness and impact resistance.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Guniting (shotcrete) is a process in which:
सही उत्तर: क) Cement mortar or concrete is sprayed pneumatically at high velocity onto a surface
Gunite/shotcrete is projected by compressed air, commonly used for tunnel lining, slope protection and repairs.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
No-fines concrete is made by omitting:
सही उत्तर: क) Fine aggregate (sand)
No-fines concrete contains cement, water and single-sized coarse aggregate only, producing light, porous concrete.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Self-compacting concrete is concrete that:
सही उत्तर: ग) Flows and consolidates under its own weight without vibration
Self-compacting concrete is highly fluid yet cohesive, filling formwork and congested reinforcement without vibration.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Carbonation of concrete is harmful to reinforced concrete because it:
सही उत्तर: ग) Reduces the alkalinity of concrete, so steel loses protection and may corrode
Carbon dioxide reacts with calcium hydroxide forming calcium carbonate, lowering the pH and depassivating the steel.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Plastic shrinkage cracks in fresh concrete are mainly caused by:
सही उत्तर: ख) Rapid evaporation of water from the surface before the concrete sets
When surface water evaporates faster than bleeding replaces it, the surface shrinks while plastic and cracks.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The ultrasonic pulse velocity test on concrete is mainly used to assess:
सही उत्तर: ख) Uniformity and quality, and to detect cracks or voids
Higher pulse velocity indicates dense, good quality concrete; lower velocity indicates cracks, voids or poor compaction.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The rebound hammer (Schmidt hammer) is a non-destructive test that estimates concrete strength from its:
सही उत्तर: क) Surface hardness
The rebound of a spring-driven mass depends on the surface hardness, which correlates with compressive strength.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
In the split tensile test of a concrete cylinder of diameter D and length L failing at load P, the tensile strength is:
सही उत्तर: क) 2P / (πDL)
The splitting (Brazilian) test gives tensile strength = 2P/(πDL).
💬 टिप्पणी / गल्ती रिपोर्ट (०)
यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।
नमस्ते! पाठ्यक्रम, सामान्य ज्ञान, भाषा परीक्षा वा कुनै प्रश्नको उत्तर बुझ्न सोध्नुहोस्।
AI ले गल्ती गर्न सक्छ। महत्वपूर्ण कुरा आधिकारिक स्रोतमा जाँच्नुहोस्।