इन्जिनियरिङ सेवा असिस्टेन्ट सब-इन्जिनियर (चौथो तह) – प्राविधिक पत्र
इन्जिनियरिङ सेवा – असिस्टेन्ट सब-इन्जिनियर (चौथो तह)
Assistant Sub-Engineer – 4th Level · Engineering Service
५०३ प्रश्न उपलब्ध। मोड छान्नुहोस्:
प्राविधिक पत्र: प्रश्न र उत्तर
सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ५ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।
सही: ० / ०
-
If the base period of a crop is 120 days and the duty is 1728 ha/cumec, the delta is:
सही उत्तर: ग) 0.60 m
Δ = 8.64B/D = 8.64 x 120 / 1728 = 0.60 m.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Water flows through a pipe of 200 mm diameter at a velocity of 2 m/s. The discharge is approximately:
सही उत्तर: ख) 0.063 m³/s
Q = AV = (π/4 x 0.2²) x 2 ≈ 0.0628 m³/s.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Bernoulli's equation for fluid flow is based on the principle of conservation of:
सही उत्तर: ग) Energy
Bernoulli's equation states that total energy head along a streamline remains constant.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
In the Standard Penetration Test (SPT), the mass of the drop hammer is:
सही उत्तर: ग) 63.5 kg
SPT uses a 63.5 kg hammer falling freely through 750 mm.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The coefficient of permeability of coarse-grained (sandy) soil in the laboratory is best found by:
सही उत्तर: क) Constant head permeability test
Constant head test suits highly permeable coarse soils; falling head is used for fine soils.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A soil sample has a void ratio of 0.6. Its porosity is:
सही उत्तर: ख) 0.375
n = e/(1+e) = 0.6/1.6 = 0.375.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A soil has liquid limit 45% and plastic limit 20%. Its plasticity index is:
सही उत्तर: घ) 25%
PI = LL - PL = 45 - 20 = 25%.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The liquid limit of a soil is commonly determined using:
सही उत्तर: ख) Casagrande's apparatus
The Casagrande cup device is the standard apparatus for the liquid limit test.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A point of contraflexure in a beam is the point where:
सही उत्तर: क) Bending moment changes sign (becomes zero)
At contraflexure the bending moment passes through zero and changes from sagging to hogging.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
In limit state design of RCC (IS 456), the partial safety factor for concrete strength is:
सही उत्तर: घ) 1.5
IS 456 adopts γm = 1.5 for concrete and 1.15 for steel.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।
नमस्ते! पाठ्यक्रम, सामान्य ज्ञान, भाषा परीक्षा वा कुनै प्रश्नको उत्तर बुझ्न सोध्नुहोस्।
AI ले गल्ती गर्न सक्छ। महत्वपूर्ण कुरा आधिकारिक स्रोतमा जाँच्नुहोस्।