नमस्ते · Hello

श्रद्धावान् लभते ज्ञानम्।

श्रद्धा भएकाले ज्ञान प्राप्त गर्छ। (गीता ४.३९)

One who has faith gains knowledge. (Gita 4.39)

…

इन्जिनियरिङ सेवा सिभिल इन्जिनियर (सातौँ तह) – प्राविधिक पत्र

इन्जिनियरिङ सेवा – सिभिल इन्जिनियर (सातौँ तह)

Civil Engineer – 7th Level · Engineering Service

१,९४० प्रश्न उपलब्ध। मोड छान्नुहोस्:

प्राविधिक पत्र: प्रश्न र उत्तर

सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ५ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।

  1. The size of a vernier theodolite (e.g. a 20 cm theodolite) is designated by the:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  2. On a contour map, a series of closed contours whose values decrease towards the centre represents a:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  3. A low point or pass between two hills or summits is represented on a contour map as a:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  4. Points A and B, 40 m apart, have RLs of 101.0 m and 106.0 m. Assuming a uniform slope, the 105 m contour lies at what distance from A?

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  5. For a small-scale map of rugged, hilly terrain, the contour interval is generally kept:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  6. Remote sensing in surveying and mapping refers to:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  7. On a contour map, contours that are closely spaced at higher elevations and widely spaced at lower elevations represent a:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  8. A line laid out on the ground surface maintaining a constant inclination to the horizontal, as for a hill road or canal, is called a:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  9. The permanent adjustment of a dumpy level that is carried out first is to make:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  10. A back sight of 1.500 m is taken on a benchmark of RL 200.000 m. The height of instrument is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।