इन्जिनियरिङ सेवा सिभिल इन्जिनियर (सातौँ तह) – प्राविधिक पत्र
इन्जिनियरिङ सेवा – सिभिल इन्जिनियर (सातौँ तह)
Civil Engineer – 7th Level · Engineering Service
५०३ प्रश्न उपलब्ध। मोड छान्नुहोस्:
प्राविधिक पत्र: प्रश्न र उत्तर
सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ५ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।
सही: ० / ०
-
In an oil paint, linseed oil acts as the:
सही उत्तर: क) Vehicle
Linseed oil is the vehicle that carries the base and pigment and forms the film.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Surkhi, used as a pozzolanic material in lime mortar, is:
सही उत्तर: क) Finely powdered burnt clay or brick
Surkhi is ground burnt clay that reacts with lime to give hydraulic properties.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The process of adding water to quick lime to obtain hydrated lime is called:
सही उत्तर: ग) Slaking
Slaking converts CaO to Ca(OH)2 with heat release.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Quick lime is chemically:
सही उत्तर: क) Calcium oxide (CaO)
Quick lime is CaO, made by burning limestone.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Marble is a metamorphic rock formed from:
सही उत्तर: ख) Limestone
Limestone recrystallises under heat and pressure to form marble.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Stainless steel resists corrosion mainly because it contains:
सही उत्तर: ग) Chromium
Chromium forms a thin protective oxide film on the steel surface.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
In the designation Fe 500 for reinforcing bars, 500 indicates:
सही उत्तर: ख) Minimum yield (0.2% proof) stress of 500 N/mm²
Fe 500 bars have a specified characteristic yield strength of 500 N/mm².
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Among the following forms of iron, the highest carbon content is found in:
सही उत्तर: ग) Cast iron
Cast iron contains about 2–4.5% carbon, much more than steel or wrought iron.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The weight per metre of a 12 mm diameter steel bar (using d²/162 kg/m) is about:
सही उत्तर: घ) 0.89 kg
12²/162 = 144/162 ≈ 0.89 kg/m.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Taking the nominal size of a modular brick with mortar as 200 mm × 100 mm × 100 mm, the number of bricks in 1 m³ of brickwork is:
सही उत्तर: क) 500
1 / (0.2 × 0.1 × 0.1) = 500 bricks.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।
नमस्ते! पाठ्यक्रम, सामान्य ज्ञान, भाषा परीक्षा वा कुनै प्रश्नको उत्तर बुझ्न सोध्नुहोस्।
AI ले गल्ती गर्न सक्छ। महत्वपूर्ण कुरा आधिकारिक स्रोतमा जाँच्नुहोस्।