नमस्ते · Hello

श्रद्धावान् लभते ज्ञानम्।

श्रद्धा भएकाले ज्ञान प्राप्त गर्छ। (गीता ४.३९)

One who has faith gains knowledge. (Gita 4.39)

…

इन्जिनियरिङ सेवा सब-इन्जिनियर (पाँचौँ तह) – प्राविधिक पत्र

इन्जिनियरिङ सेवा – सब-इन्जिनियर (पाँचौँ तह)

Sub-Engineer – 5th Level · Engineering Service

१,५०३ प्रश्न उपलब्ध। मोड छान्नुहोस्:

प्राविधिक पत्र: प्रश्न र उत्तर

सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ५ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।

  1. In the spot level (borrow pit) method of computing volume over a grid of equal rectangles of area A, the volume is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  2. Ordinates of 2, 3, 4, 5 and 6 m are taken at equal intervals along a 40 m base line. By the average ordinate rule, the area is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  3. Using the approximate formula offset = x²/(2R), the perpendicular offset from the tangent at 20 m from the tangent point for a curve of radius 200 m is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  4. A vertical curve formed where a falling (descending) gradient meets a rising (ascending) gradient is a:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  5. Superelevation (cant) is provided on horizontal curves of roads and railways to:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  6. The shift of a circular curve due to a transition curve of length L and radius R is approximately L²/(24R). For L = 60 m and R = 300 m, the shift is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  7. A curve consisting of two circular arcs bending in opposite directions, with a common tangent at the junction, is a:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  8. The point of intersection of two straights has chainage 1000.0 m and the tangent length of the curve is 109.2 m. The chainage of the point of curvature (beginning of curve) is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  9. For a simple circular curve of radius 200 m and deflection angle 60°, the apex distance R(sec Δ/2 − 1) is about:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  10. Trilateration differs from triangulation in that, in trilateration:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।