इन्जिनियरिङ सेवा सब-इन्जिनियर (पाँचौँ तह) – प्राविधिक पत्र
इन्जिनियरिङ सेवा – सब-इन्जिनियर (पाँचौँ तह)
Sub-Engineer – 5th Level · Engineering Service
७०३ प्रश्न उपलब्ध। मोड छान्नुहोस्:
प्राविधिक पत्र: प्रश्न र उत्तर
सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ५ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।
सही: ० / ०
-
A town supplies 5 MLD of water disinfected with a chlorine dose of 2 mg/L. If bleaching powder has 25% available chlorine, the bleaching powder needed per day is:
सही उत्तर: ग) 40 kg
Chlorine needed = 5 x 2 = 10 kg/day, so bleaching powder = 10 / 0.25 = 40 kg/day.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Chlorine is applied at 2.0 mg/L and the residual after the contact period is 0.2 mg/L. The chlorine demand of the water is:
सही उत्तर: ग) 1.8 mg/L
Chlorine demand = dose - residual = 2.0 - 0.2 = 1.8 mg/L.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Among chlorine species in water, the most effective disinfectant is:
सही उत्तर: घ) Hypochlorous acid (HOCl)
HOCl is a much stronger germicide than OCl- or chloramines.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Breakpoint chlorination is the dose of chlorine:
सही उत्तर: क) Beyond which any added chlorine appears as free residual chlorine
After the breakpoint, chloramines and other demands are satisfied and added chlorine shows up as free residual.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Aeration of water is mainly used to remove:
सही उत्तर: ख) Taste and odour, CO2 and H2S
Aeration strips dissolved gases such as CO2 and H2S that cause taste, odour and corrosion.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
'Air binding' in a rapid sand filter is mainly caused by:
सही उत्तर: ख) Negative head developing in the filter bed
When head loss exceeds the water depth, negative pressure lets dissolved air come out and clog the sand.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A water treatment plant treats 4.8 MLD through rapid sand filters at a filtration rate of 5 m3/m2/h. The filter area needed is:
सही उत्तर: ग) 40 m2
Flow = 4,800 / 24 = 200 m3/h, so area = 200 / 5 = 40 m2.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
For a filter sand, D10 = 0.3 mm and D60 = 0.6 mm. Its uniformity coefficient is:
सही उत्तर: घ) 2.0
Uniformity coefficient = D60 / D10 = 0.6 / 0.3 = 2.0.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The uniformity coefficient of filter sand is defined as:
सही उत्तर: क) D60 / D10
Uniformity coefficient is the ratio of the 60% finer size to the 10% finer (effective) size.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A rapid sand filter is cleaned by:
सही उत्तर: क) Backwashing
Water (and often air) is forced upward through the bed to wash out trapped impurities.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।
नमस्ते! पाठ्यक्रम, सामान्य ज्ञान, भाषा परीक्षा वा कुनै प्रश्नको उत्तर बुझ्न सोध्नुहोस्।
AI ले गल्ती गर्न सक्छ। महत्वपूर्ण कुरा आधिकारिक स्रोतमा जाँच्नुहोस्।