नमस्ते · Hello

विद्याधनं सर्वधनप्रधानम्।

सबै धनमध्ये विद्यारूपी धन नै प्रमुख हो।

Of all wealth, the wealth of learning is the greatest.

…

प्राविधिक – इलेक्ट्रिकल, मेकानिकल र टेलिकम

प्राविधिक – इलेक्ट्रिकल, मेकानिकल र टेलिकम

Technical – Electrical, Mechanical & Telecom · ४,५०० प्रश्न

४,५०० प्रश्न उपलब्ध। मोड छान्नुहोस्:

इलेक्ट्रिकल र टेलिकम: प्रश्न र उत्तर

सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ३ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।

  1. A 400 V three-phase induction motor delivers 15 kW at an efficiency of 90% and a power factor of 0.85. Its line current is about:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  2. A balanced delta load of 30 Ω per phase is to be replaced by an equivalent balanced star load. The star impedance per phase is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  3. Three 20 Ω resistors are star-connected to a 400 V (line) three-phase supply. The total power consumed is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  4. A load current of 20 A has a power factor of 0.6 lagging. Its active (in-phase) and reactive (quadrature) components are:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  5. A series RL circuit has R = X_L at 50 Hz. If the frequency is raised to 100 Hz, the power factor becomes about:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  6. A coil of 0.1 H and 10 Ω resistance is in parallel with a 10 μF capacitor. The dynamic impedance at resonance is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  7. The capacitance needed to make a 0.1 H inductor resonate at 1 kHz is about:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  8. A series RLC circuit at 100 V resonance has R = 5 Ω and X_L = X_C = 250 Ω. The voltage across the capacitor at resonance is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  9. If the power factor of a load is improved from 0.6 to 1.0 at the same active power and voltage, the line current is reduced by:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  10. A 230 V, 50 Hz single-phase load takes 2 kW at 0.7 power factor lagging. The shunt capacitance needed to raise the power factor to unity is about:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।