प्राविधिक – इलेक्ट्रिकल, मेकानिकल र टेलिकम
प्राविधिक – इलेक्ट्रिकल, मेकानिकल र टेलिकम
Technical – Electrical, Mechanical & Telecom · ४,५०० प्रश्न
४,५०० प्रश्न उपलब्ध। मोड छान्नुहोस्:
इलेक्ट्रिकल र टेलिकम: प्रश्न र उत्तर
सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ३ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।
सही: ० / ०
-
A single-phase load draws 10 A from a 230 V supply at a power factor of 0.8 lagging. Its reactive power is:
सही उत्तर: ग) 1380 VAR
sin phi = sqrt(1 - 0.8^2) = 0.6, so Q = V I sin phi = 230 x 10 x 0.6 = 1380 VAR.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A current of 10 A flows through a series circuit of R = 6 ohm and X_L = 8 ohm. The active power consumed is:
सही उत्तर: क) 600 W
Only the resistance consumes active power: P = I^2 R = 10^2 x 6 = 600 W.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
In a series RL circuit, the voltage across the resistor is 30 V and across the pure inductor is 40 V. The supply voltage is:
सही उत्तर: घ) 50 V
The two voltages are 90 degrees apart, so V = sqrt(30^2 + 40^2) = 50 V.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A series RC circuit with R = 8 ohm and X_C = 6 ohm is connected to a 100 V AC supply. The current is:
सही उत्तर: क) 10 A
Z = sqrt(8^2 + 6^2) = 10 ohm, so I = 100 / 10 = 10 A.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The product of the phasors 2 at an angle of 30 degrees and 3 at an angle of 20 degrees is:
सही उत्तर: क) 6 at an angle of 50 degrees
In polar form magnitudes are multiplied and angles added: 2 x 3 = 6 and 30 + 20 = 50 degrees.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The sum of the complex impedances (3 + j4) ohm and (1 - j1) ohm is:
सही उत्तर: ग) (4 + j3) ohm
Add the real and imaginary parts separately: (3 + 1) + j(4 - 1) = 4 + j3.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
In AC circuit analysis, the operator j satisfies:
सही उत्तर: क) j^2 = -1
j = sqrt(-1) represents a 90 degree rotation, so two rotations (j^2) reverse the phasor: j^2 = -1.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The phasor 10 at an angle of 90 degrees, written in rectangular form, is:
सही उत्तर: क) j10
10(cos 90 + j sin 90) = 0 + j10.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
If v = 10 sin(wt + 60 degrees) and i = 5 sin(wt - 30 degrees), then:
सही उत्तर: ख) the voltage leads the current by 90 degrees
Phase difference = 60 - (-30) = 90 degrees, with the voltage ahead, as in a purely inductive circuit.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The form factor of a symmetrical square wave is:
सही उत्तर: ग) 1
For a square wave the RMS and average (half-cycle) values both equal the peak, so their ratio is 1.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।
नमस्ते! पाठ्यक्रम, सामान्य ज्ञान, भाषा परीक्षा वा कुनै प्रश्नको उत्तर बुझ्न सोध्नुहोस्।
AI ले गल्ती गर्न सक्छ। महत्वपूर्ण कुरा आधिकारिक स्रोतमा जाँच्नुहोस्।