प्राविधिक – इलेक्ट्रिकल, मेकानिकल र टेलिकम
प्राविधिक – इलेक्ट्रिकल, मेकानिकल र टेलिकम
Technical – Electrical, Mechanical & Telecom · ४,५०० प्रश्न
४,५०० प्रश्न उपलब्ध। मोड छान्नुहोस्:
इलेक्ट्रिकल र टेलिकम: प्रश्न र उत्तर
सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ३ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।
सही: ० / ०
-
Which statement about magnetic lines of force is correct?
सही उत्तर: ख) They never intersect each other
If two lines crossed, the field would have two directions at one point, which is impossible.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The strength of an electromagnet can be increased by:
सही उत्तर: ख) increasing the number of turns or the current
The magnetising force depends on ampere-turns (N x I).
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Two coils of self-inductance 2 H and 8 H with mutual inductance 3 H are connected in series so that their fluxes aid each other. The total inductance is:
सही उत्तर: ग) 16 H
Series aiding: L = L1 + L2 + 2M = 2 + 8 + 6 = 16 H.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The emf induced in the secondary winding of a transformer, where the coil is stationary and the flux changes, is an example of:
सही उत्तर: घ) statically induced emf
In static induction the conductor does not move; the flux linking it changes. Dynamic induction (as in generators) needs motion.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A conductor 0.4 m long moves at 10 m/s at right angles to a uniform magnetic field of 0.5 T. The emf induced in it is:
सही उत्तर: ख) 2 V
e = B l v = 0.5 x 0.4 x 10 = 2 V.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A long solenoid 0.5 m long has 1000 turns and carries 2 A. The magnetic flux density inside it (air core) is about:
सही उत्तर: घ) 5.03 mT
B = mu_0 N I / l = 4 pi x 10^-7 x 1000 x 2 / 0.5 = 5.03 x 10^-3 T.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Eddy current loss in a magnetic core is proportional to the square of the:
सही उत्तर: घ) supply frequency
Eddy current loss is proportional to B_max^2 f^2 t^2 V, so it rises with the square of frequency.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
According to Steinmetz's empirical formula, hysteresis loss per unit volume is proportional to the maximum flux density raised to the power of about:
सही उत्तर: ख) 1.6
Hysteresis loss = eta x B_max^1.6 x f x V, where eta is the Steinmetz coefficient.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The coercive force of a magnetic material is the:
सही उत्तर: ग) reverse magnetising force needed to reduce the residual flux density to zero
Coercivity measures how strongly a material resists demagnetisation.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
Residual magnetism (retentivity) of a material is the:
सही उत्तर: क) flux density remaining after the magnetising force is reduced to zero
It is the magnetism left in the material when H returns to zero.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।
नमस्ते! पाठ्यक्रम, सामान्य ज्ञान, भाषा परीक्षा वा कुनै प्रश्नको उत्तर बुझ्न सोध्नुहोस्।
AI ले गल्ती गर्न सक्छ। महत्वपूर्ण कुरा आधिकारिक स्रोतमा जाँच्नुहोस्।