नमस्ते · Hello

उद्यमेन हि सिध्यन्ति कार्याणि न मनोरथैः।

काम परिश्रमले पूरा हुन्छ, इच्छाले मात्र होइन।

Work is done by effort, not by wishing alone.

…

प्राविधिक – इलेक्ट्रिकल, मेकानिकल र टेलिकम

प्राविधिक – इलेक्ट्रिकल, मेकानिकल र टेलिकम

Technical – Electrical, Mechanical & Telecom · ४,५०० प्रश्न

४,५०० प्रश्न उपलब्ध। मोड छान्नुहोस्:

इलेक्ट्रिकल र टेलिकम: प्रश्न र उत्तर

सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ३ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।

  1. An ideal transformer with a turns ratio of 10 : 1 (primary : secondary) has an 8 ohm loudspeaker on its secondary. The resistance seen at the primary is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  2. A current i = 5 sin(100t) A flows through a pure 0.2 H inductor. The peak voltage across it is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  3. A toroid of 1000 turns and mean radius 10 cm carries 1 A. The flux density inside its air core is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  4. Two long parallel conductors 10 cm apart in air carry currents of 2 A and 5 A. The force per metre between them is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  5. Two coils have self-inductances of 4 mH and 9 mH and a coefficient of coupling of 0.5. Their mutual inductance is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  6. If the supply frequency to a magnetic core is doubled while the maximum flux density is kept the same, the hysteresis loss:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  7. A coil of 200 turns links a sinusoidal flux of maximum value 5 mWb at 50 Hz. The RMS emf induced in it is about:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  8. A conductor 0.5 m long carries 10 A in a uniform field of 0.8 T, making an angle of 30° with the field. The force on it is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  9. An iron ring has an air gap of 1 mm. The ampere-turns needed for the air gap alone to set up a flux density of 1 T in it is about:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  10. A coil of 500 turns carrying 2 A is wound on a ring of mean length 0.5 m. The magnetising force H is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।