आधारभूत विद्युत् (Basic Electrical) – Basic Electrical Engineering MCQ
आधारभूत विद्युत् (Basic Electrical) – इलेक्ट्रिकल र टेलिकम
Basic Electrical Engineering · Technical – Electrical, Mechanical & Telecom · २,२९९ प्रश्न
२,२९९ प्रश्न उपलब्ध। मोड छान्नुहोस्:
आधारभूत विद्युत् (Basic Electrical): प्रश्न र उत्तर
सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ३ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।
सही: ० / ०
-
A sinusoidal voltage completes 50 cycles in one second. The time taken for one half-cycle is:
सही उत्तर: ख) 10 ms
T = 1/50 = 20 ms, so a half-cycle takes 10 ms.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
An alternating current i = 14.14 sin(314t) A flows in a circuit. Its value at t = 2.5 ms is about:
सही उत्तर: क) 10 A
314 × 0.0025 = 0.785 rad = 45°, so i = 14.14 × sin 45° ≈ 10 A.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The conductance (real part of the admittance) of an impedance Z = 6 + j8 ohm is:
सही उत्तर: ख) 0.06 S
Y = 1/Z = (6 − j8)/100, so G = 6/100 = 0.06 S.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A series RLC circuit has R = 10 ohm, L = 0.1 H and C = 10 μF. Its quality factor at resonance is:
सही उत्तर: ग) 10
Q = (1/R)√(L/C) = (1/10)√(0.1/10⁻⁵) = (1/10) × 100 = 10.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
The capacitance needed to resonate with a 0.25 H inductor at 50 Hz is about:
सही उत्तर: घ) 40.5 μF
C = 1/(ω²L) = 1/((314.16)² × 0.25) ≈ 40.5 × 10⁻⁶ F.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
In a circuit, v = 100 sin(ωt) V and i = 5 sin(ωt + π/3) A. The average power consumed is:
सही उत्तर: ख) 125 W
P = (V_m I_m/2) cos φ = (100 × 5/2) × cos 60° = 250 × 0.5 = 125 W.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A coil has a resistance of 8 ohm and an inductive reactance of 15 ohm. Its impedance is:
सही उत्तर: घ) 17 ohm
Z = √(8² + 15²) = √289 = 17 ohm.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A 10 kW load operates at 0.8 power factor lagging. The capacitor kVAR needed to improve the power factor to 0.95 lagging is about:
सही उत्तर: क) 4.2 kVAR
Q_C = P(tan φ₁ − tan φ₂) = 10(0.75 − 0.329) ≈ 4.2 kVAR.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A load takes 50 kVA at 40 kW. Its reactive power is:
सही उत्तर: ग) 30 kVAR
Q = √(S² − P²) = √(2500 − 1600) = 30 kVAR.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
-
A 10 ohm resistor and a pure inductor of reactance 10 ohm are connected in parallel across a 100 V AC supply. The total supply current is about:
सही उत्तर: घ) 14.1 A
I_R = 10 A and I_L = 10 A (lagging by 90°), so I = √(10² + 10²) ≈ 14.1 A.
💬 टिप्पणी / गल्ती रिपोर्ट (०)
यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।
नमस्ते! पाठ्यक्रम, सामान्य ज्ञान, भाषा परीक्षा वा कुनै प्रश्नको उत्तर बुझ्न सोध्नुहोस्।
AI ले गल्ती गर्न सक्छ। महत्वपूर्ण कुरा आधिकारिक स्रोतमा जाँच्नुहोस्।