नमस्ते · Hello

विद्या ददाति विनयं विनयाद् याति पात्रताम्।

विद्याले विनम्रता दिन्छ, विनम्रताबाट योग्यता आउँछ।

Knowledge gives humility, and humility makes one worthy.

…

सर्भेक्षण – Surveying MCQ

सर्भेक्षण – सिभिल इन्जिनियरिङ

Surveying · Civil Engineering · १,५६५ प्रश्न

१,५६५ प्रश्न उपलब्ध। मोड छान्नुहोस्:

सर्भेक्षण: प्रश्न र उत्तर

सही लागेको विकल्पमा थिच्नुहोस्। सही भए हरियो, गलत भए रातो देखिन्छ; ३ सेकेन्डपछि सही उत्तर र व्याख्या देखिन्छ।

  1. In setting out a simple circular curve by Rankine's method, the total deflection angle from the back tangent to the point of tangency equals:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  2. A vertical curve provided where an ascending gradient meets a descending gradient is called a:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  3. The length of a transition curve is often found from L = v³/(C R). For v = 20 m/s, C = 0.5 m/s³ and R = 400 m, the length is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  4. In setting out a circular curve by offsets from chords produced, with full chords of 20 m and a radius of 200 m, the offset for each full chord after the first is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  5. In a mass haul diagram, a horizontal 'balancing line' cutting the curve at two points indicates that between those points:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  6. The trapezoidal rule for computing areas assumes that the boundary between successive ordinates is:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  7. The areas enclosed by the 100 m, 102 m and 104 m contours of a hill are 900 m², 400 m² and 100 m² respectively. By the prismoidal (Simpson's) formula, the volume between the 100 m and 104 m contours is about:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  8. A contour map is used in water resources projects to delineate the:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  9. A ridge line, joining the highest points of the ground and dividing the flow of rainwater to either side, is also called a:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

  10. Where contour lines cross a ridge, they form V or U shapes with the apex pointing:

    💬 टिप्पणी / गल्ती रिपोर्ट (०)

    टिप्पणी जाँचपछि मात्र देखिन्छ।

यी अभ्यास प्रश्न हुन्, आधिकारिक प्रश्न होइनन्। पाठ्यक्रम, विज्ञापन र नतिजाका लागि सम्बन्धित निकायको आधिकारिक वेबसाइट हेर्नुहोस्। उत्तरमा गल्ती भेटे प्रश्नमुनिको "टिप्पणी / गल्ती रिपोर्ट" मा लेख्नुहोस्।